Razer zSilver will be undergoing scheduled maintenance on Nov 21 2017 ~ Dec 1 2017 for us to serve you better. Learn more.

Razer Blade 2016 GTX 1060 Fan

Discussion in 'Systems' started by RazerGwynbleidd, Nov 5, 2016.

  1. WaschBaer

    WaschBaer Active Member

    actually most of us here have the left fan ( cpu one ) stuck at 30% while the right one chills at around 10% or less ( what actually is pretty fine in terms of noise for me .. ) the left one is anoying -.-... it ramps up like the right one when it needs to but the minimum speed seems to be set at 40% -.-
     
    vistar likes this.
  2. You could try to undervolt to squeeze 70%. But I would be totally fine with 50% or 60% and having a passive running system. I bet you won't notice any difference in performance during every day work and actually your battery will also run longer. Perhaps I will buy the 2017 model... will need to see if can get hands on a US keyboard here in EU. Hate the German layout (even being German)
     
    vistar likes this.
  3. So I ended up using my MS Complete warranty for this issue, citing that as a programmer the loud idle noise is too much of an issue.

    Got the new one and it's very nice with the fans being off on idle. Makes me think my old one might have been used as it had other issues. Cord had shown signs of wear, touchpad had permanent blemishes, SSD performance was a third of what I have now (3300/1500 or something like that). None of those issues in the new one. Also, in the new blade hitting FN makes the FN keys highlight as white instead of blue.

    Good luck with ya'll on this issue.
     
  4. WaschBaer

    WaschBaer Active Member

    new one what ? from 6700 to 7700k ? or what model ? . the fans being off in idle on the model this thread is about is not normal right now .. if you have the 6700k than you either have a version with a fix installed that we still dont have .. or you have a defective one .. or somehow its just so amazing silent that it brings up a new point that makes me ask why is yours so quiet that you think the fan is off lol .. why are our models so loud, and why didn rma help us all here ..
     
  5. Joikansai

    Joikansai Well-Known Member

    I think he got the new "Kabylake" one right? If not someone from official staff would already give a response here.
     
    vistar and redfeather like this.
  6. vistar

    vistar Active Member

    The skylake model also does this when pressing the FN key.
    I am glad you managed to get your skylake swapped for the kabylake model. Most of us are out of luck with that option.
     
    Last edited: Mar 18, 2017
  7. I was just given a refund for my skylake one so am incredibly happy about that!!!
     
    vistar likes this.
  8. WaschBaer

    WaschBaer Active Member

    he didnt say wich one he got and had ..
     
  9. vistar

    vistar Active Member

    Did you get yours through MS store? For my next laptop I will definitely go through MS store, since I only hear great things about their CS and extended warranty. I got mine through Amazon in November, so I am way past the return date, unfortunately.
     
    Last edited: Mar 18, 2017
  10. dinh1782

    dinh1782 New Member

    taking for ever!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
     
    vistar likes this.
  11. @WaschBaer, I went Sky -> Kaby.

    Wow surprised that the Sky also did white on FN. Gives me more reason to think my old one was secretly refurb or used. This new one is so much smoother on the trackpad. I think my old one might have had driver issues. I couldn't horizontal scroll on that one but can on the new one.
     
    vistar likes this.
  12. WaschBaer

    WaschBaer Active Member

    wow gratz on that .. -.- .. apperantly with me having it from second hand and the first guy had it from razer directly .. i cant contact windows for replacement :stuck_out_tongue_winking_eye: so i need to wait for a fix -.-... now i have a dead bearing on one fan .. i can reduze a takling noise when gently hitting the side of the fan ..-.-... but it also seems to be consistant noise even when i ramp up or down the fan .. that makes me think that its not the bearing .. -.-.. i cant replace it inside warranty cause i need the laptop for studying i cant give it away for longer than 2 days.. also i would lost all my skins ( razer support guy said they get riped of .. even when they just need to change a fuckin fan .. rlly ? ) .. i have to send it in for warranty in summer and exactly at the time when i dont need it and have a pause from studiying the warranty expired 3 days ago .. so rip ..
     
  13. lolcheese987

    lolcheese987 Member

    have you tried using speed fan to fix this?
     
  14. WaschBaer

    WaschBaer Active Member

    woow really ? :D .. lol .. speedfan does not work on most laptops and not on this one .. they would have to make profiles for every laptop available cause all use different tech to control fans .. :/ so no way but nbfc works for me now with the command promt fix disabling action on 0% battery :stuck_out_tongue_winking_eye:
     
  15. dventu

    dventu Member

    Is nbfc causing random win 10 crashes for you. When I had it installed it would crash my system. What profile are you using? Can you provide links to what you downloaded? If your not experiencing crashes.

    Sent from my SM-G925I using Tapatalk
     
  16. WaschBaer

    WaschBaer Active Member

    i had no crashes and im using it for 3 days now :stuck_out_tongue_winking_eye: no hibernate no shutdowns using this command
    To change the 'Battery->Critical battery action->'On battery' setting to "Do nothing" using powercfg.exe
    1. activate the power scheme you want to modify.
    2. open an elevated command console (windows key, type 'cmd' in start menu, press "ctrl+shift+enter", click 'continue')
    3. execute "powercfg -setdcvalueindex SCHEME_CURRENT SUB_BATTERY BATACTIONCRIT 0"
    4. your current power scheme will show "Battery->Critical battery action->On battery: Do nothing" despite the option being unavailable in the drop box.
    on battery ->powercfg -setdcvalueindex SCHEME_CURRENT SUB_BATTERY BATACTIONCRIT 0
    on charger ->powercfg -setacvalueindex SCHEME_CURRENT SUB_BATTERY BATACTIONCRIT 0


    this profile for nbfc ( mine i modified it for my needs .. fan speeds may be to low for yours ! better test it with a bench tool getting some heat and stuff ) .. :
    -> https://mega.nz/#!h8Yy3bDa!1N0R3mVGThPWIj-fGjPYDicktRBThJj67bNFBZpiPN4 <-
     
    Last edited: Mar 19, 2017
    vistar likes this.
  17. dventu

    dventu Member

    Ok will do. Once you post a link. I'll take a look at the profile.

    Sent from my SM-G925I using Tapatalk
     
  18. WaschBaer

    WaschBaer Active Member

    uploaded
     
  19. dventu

    dventu Member

    Okay thanks. I just plugin it in and change the settings I will see if I get crashes again or not. What setting did you change just so I know for reference if I want to ram them up. Time to snooze now Its 10:30 pm right now will see if it crashes tomorrow when I'm writing my essay. lol

    Ahh quiet fans!!!!

    PS its pretty akward when your fans are roaring in a quiet library. Is there a way to stop the fans when under lets say 25 degrees? My battery life time span went up
     
  20. WaschBaer

    WaschBaer Active Member

    only thing i changed was the fan speed at different temps so its longer slow and when it hits around 60 it ramps up in higher increments ;) and i think the poll rate was changed from 100 to 150 otherwhise only thing changed was the cmd line thingy for the battery crit lvl and what to do when it reaches 0 :D .. but that will mean no data saving if your battery actually raches 1% or smt .. the pc will just run and suck the battery empty unless you notice the battery level :stuck_out_tongue_winking_eye: